Closed Thread
Results 1 to 5 of 5

Reload Thread: i need some advice new amp

  1. #1
    NELSON583's Avatar
    NELSON583 is offline Junior Member



    Join Date
    May 2003
    Location
    FLORIDA
    Age
    44
    Posts
    19
    Post Thanks / Like
    Mentioned
    0 Post(s)

    i need some advice new amp

    ok i like to change my amp i have a pyramid 500rms 2 ch. i like to now if someone now this amp spl by power acoustic
    SPL Series I Extreme Power 1600w 2-Channel Amplifier
    Full Mosfet Power Supply
    PWM Circuitry
    Full Selectable Crossover, Hi/Full/Low
    3-way Protection Circuit
    2 Ohm Stable Stereo
    Tri-Mode Capable
    Variable low Pass 40Hz-120Hz
    Variable Hi Pass 150Hz-1.5KHz
    18 dB Bass Boost @ 40 Hz
    Frequency Response: 10Hz to 30KHz
    S/N Ratio: 97dB
    THD: 0.02%
    System Distress Indicator
    Hi/Low Level Inputs With Floating Ground
    4 Ga. Power/Ground Connection
    Gold Plated RCA Connectors
    Line Output4 Ohm RMS 310 x 2
    2 Ohm RMS 370 x 2
    Mono RMS 740
    Bridged



    ROTOR




  2. #2
    Woodmister's Avatar
    Woodmister is offline Radford!



    Join Date
    Feb 2003
    Location
    NorthVA
    Age
    28
    Posts
    1,331
    Post Thanks / Like
    Images
    12
    Mentioned
    0 Post(s)
    Try a different amp. What subs do you have? Price Range, vehical? These are needed to help ya out...



    My Garage NEW PICS/WRITEUP on the fiberglass

  3. #3
    NELSON583's Avatar
    NELSON583 is offline Junior Member

    Threadstarter


    Join Date
    May 2003
    Location
    FLORIDA
    Age
    44
    Posts
    19
    Post Thanks / Like
    Mentioned
    0 Post(s)

    power acoustic 1600

    ok i build a sealed box for 4 sub 10 inches at 1cf. each. my sub. audiobahn aw1051q 300 rms watts. now i have a pyramid 250 rms x 2 the bass sound ok now but i want more power to move my sub . a have friend runing 4 sub. in a sealed box with a power acoustic 2 channel the bass is loud around $200 for now. but i need some advice w/.power acoustic 1600



    ROTOR

  4. #4
    Woodmister's Avatar
    Woodmister is offline Radford!



    Join Date
    Feb 2003
    Location
    NorthVA
    Age
    28
    Posts
    1,331
    Post Thanks / Like
    Images
    12
    Mentioned
    0 Post(s)
    Ok, so you have 200bux to spend on an amp. Those Audiobahns have dual 4ohm ratings, which means that hooking up four will give you a 2ohm or 8ohm load. I suggest a mono amp, just makes it much eaiser. And the amp this is right in your price range is the JBL 600.1 @ www.ikesound.com which will give you 700watts @ 2ohms (they sold out, so try looking around at other places, dont really know off the top of my head). I wouldnt trust Power Acoustic....

    EDIT: Also look into US Acoustics @ www.thezeb.com they have all the goodies you need for only 37bux more, free shipping, Subsonic Filter, remote gainn. The SSF is used if you want to port your box later. USX also puts out 700ish watts when your car is on (14.9volts)...



    My Garage NEW PICS/WRITEUP on the fiberglass

  5. #5
    mamey69's Avatar
    mamey69 is offline Quiero Cerveza!!



    Join Date
    Dec 2002
    Location
    Guaymas, Son, Mexico
    Age
    31
    Posts
    438
    Post Thanks / Like
    Mentioned
    0 Post(s)
    If you can wire the sub to 4ohms look also to the profile 1200x 900rms at 4ohms at ikesound.com



    =The Silent Member=

    "This site will help you to understand basic electronics and some electronic devices. " http://www.eatel.net/~amptech/elecdisc/caraudio.htm

    Another interesting site to check box calculations and some other issues http://www.the12volt.com

Closed Thread

Posting Permissions

  • You may not post new threads
  • You may post replies
  • You may post attachments
  • You may edit your posts

1e2 Forum