how many batts should i get for...
...4 ma audio 2 ch amps, and 1 ma audio 4 ch amp?
hk898 (2ch)
hk898 (2ch)
hk398 (2ch)
hk298 (2ch)
hk598 (4ch)
its all for mids and highs, and will be run off the stock alt for now, im not upgrading it unless my lights dim alot, but im going to do the big 3, and all i have right now on the stock alt is a red top.
Re: how many batts should i get for...
Quote:
Originally Posted by
bmxbikes
Doesnt matter how many batteries have if you cant properly charge em :fyi:
x2
Re: how many batts should i get for...
i know, what kind of electrical you think i should use?
Re: how many batts should i get for...
get a 200 amp alt and a 2400 should be good
Re: how many batts should i get for...
Quote:
Originally Posted by
bmxbikes
Get dual 300A alts and 4 kinetik 2400's since your running an insane amount of ****
or that works to
Re: how many batts should i get for...
Re: how many batts should i get for...
Quote:
Originally Posted by
bmxbikes
A single 200A alt and 1 hc2400 are gonna power 5 front amps and 4 hk4000d's? Not sure how many watts those front amps are putting out but your gonna need one hell of an electrical system to support 20k watts. Also better skip an alarm and just pay someone to sit in your car with a shotgun
i said that do to the fact the 4000s werent listed in what he was asking to power next time learn to read
Re: how many batts should i get for...
Quote:
Originally Posted by
bmxbikes
So seperate 16v alternator? Then get a 300A alternator and 2 hc2400's and you should be set
seems like alot for some 2 ch amps
Re: how many batts should i get for...
Quote:
Originally Posted by
bmxbikes
Whats the power rating on the amps? You seem to be running more for your front stage then most people do subs. And your stock alt wont be able to properly charge the batteries for what your needing
Not by a long shot...
At LEAST dual alts...
At LEAST 4 Batts...
Re: how many batts should i get for...
2x hk898 = 500w rms x 2 @ 2 ohm
1x hk598 = 400w rms x 2 @ 4 ohm bridged
1x hk398 = 150w rms x 2 @ 4 ohm (for the horns, will be run @ 8 ohm, so like 75w x 2)
1x hk298 = 150w rms x 2 @ 2 ohm
Re: how many batts should i get for...
Quote:
Originally Posted by
j3bus2k3
Not by a long shot...
At LEAST dual alts...
At LEATS 4 Batts...
lmao dual alts for 2 ch amps....thats a little over kill IMO.
Re: how many batts should i get for...
i need to look up how many amps each amp draws...i have the manals at home...
Re: how many batts should i get for...
Quote:
hk898 (2ch)
hk898 (2ch)
hk398 (2ch)
hk298 (2ch)
hk598 (4ch)
its all for mids and highs,
Do you have system diagram on what you want to do? All those amps
for mids and highs won't draw as much power from your electrical system
as you think if you play music. One 200A alt for those amps should be cool.
Re: how many batts should i get for...
one 300 and a nice battery or 2 should be fine no need for duals just for the speaks now for the 4000ds you will need duals
Re: how many batts should i get for...
Quote:
Originally Posted by
pimpedout97x
lmao dual alts for 2 ch amps....thats a little over kill IMO.
I'm talking for your entire setup, the 4000Ds AND the mess of 2chs. Run a seperate 16V alt for the 4000ds and then the other for the 2ch...