Kicker KX2500.1??????

[ravens9322]

Kickers website says that the huge 2500.1 is only 2 ohm stable. Is that true? I would have thought for sure that the 2500.1 would be 1 ohm stable. I was looking at putting one of these on a dual 2 ohm 12" soloX and it needs to be 1 ohm stable.

If you know please reply.

Thanks
Chris

[Jordantyler]

ive heard really good things bout that amp but i dont know the answer to that question just thought i would put my 2 cents in

[ravens9322]

yea i thought it was a good amp but if its only 2 ohm stable then ill just go with 2 smaller 2 ohm stable amps, one for each coil.

Thanks
Chris

[Jordantyler]

good luck with ur setup hope u like it

[Prowler573]

That seems really strange that much amp isn't stable at 1 Ohm but I couldn't say for certain never having ran one.

Polecat would be the one to ask out of anyone on the forum.

[ravens9322]

That seems really strange that much amp isn't stable at 1 Ohm but I couldn't say for certain never having ran one.

Polecat would be the one to ask out of anyone on the forum.

Yea i thought it was strange also, kicker website says that its only 2 ohm stable but i was hoping it was wrong because if i cant run that then ill run 2 Infinity 1211a's to each VC of the SOLOX.

But i would really like an answer on this. lol

Thanks
Guys

[blaze383]

It is 2 ohm and the new ZX series 2500.1 is 2 ohm also.

[thunder9500]

Its a 2 ohm stable amp....and tracy will shoot me for telling you this.....but I run 2 of mine daily at 1 ohm each and they have no issues.

[scoupen]

We've got one in a customer's truck running at 1ohm on a pair of soloX 10"s for daily.....no problems as long as you have the battery power to run it.

[ravens9322]

well i want to put one on a solox 12" running at 1 ohm for daily. I plan on adding an extra battery but should i upgrade the alt.? and to what amp should i make it?

Thanks for the replys guys.
Chris

[scoupen]

It's in a dodge ram ext.cab with I think a 140A alt....He's got a yellowtop under the hood and three batcap800s in the back for juice.

EDIT...He's got a bunch of video and acc stuff too, he doesn't need all that just for the amp.

[Polecat]

yes, the KX2500's have always been 2 ohm stable, can they run lower, as Carlton and Erik, looks like they do fine...as far as juice, I'm just adding two Kinetik battery's to mine, have a ZX850.4 and a KX25001, so installing a HC1800 under the hood and an HC2400 for the system.

[Raisedin305]

KX2500.1 is rated at 2,500rms @2ohms. Whether you want to take the chance and run it @1ohm is up to you. I know some people that have done it.

[bimma85]

do you already have the x? don't they make dual 4s or dual 1s?

[snb778]

Ive seen a 1200.1 be run at 1/4 ohm and it was POUNDIN 3 15's