I was wondering if this amp would work at 1.5 ohms.

Here are some more specs about it:

THUNDER1501D

• RMS Power measured at 12.5 Volts DC:

500 Watts x 1 into a 4 Ohm load with less than 2% Thd+N

1000 Watts x 1 into a 2 Ohm load with less than 2% Thd+N

• Dynamic Power measured at 14.4 Volts DC:

750 Watts x 1 into a 4 Ohm load

1500 Watts x 1 into a 2 Ohm load

• Signal to Noise Ratio: ≥100dB A-Weighted

• Damping Factor: >100

• Frequency Response: 20Hz-200Hz ± 3dB

• Maximum Input: 8Vrms

• Thunder EQ: Variable Bass Boost (0-18dB) centered at 40Hz

• Crossover: Variable 40Hz to 200Hz, 24dB/Octave Low Pass

• Dimensions: 17.8" x 9.75" x 2.1" (45.3cm x 24.8cm x 5.3cm)

## Bookmarks