wow so i can strap both my 3000d's at .5 ohm so they would both see .25 and be safe with proper electrical?
-
38Participant count
-
Participant list
SPLluminator 10+ year member
CarAudio.com Veteran
No.
Well prolly not. You gotta remember when you play music your impediance changes all over. When playing tones your rise is very high. I wouldnt recommend running them at .25. But they will love .5.
Ok well ill just strap them at 2 ohm's then so they both see 1ohm becuase i have 2 d2 15's
If you gotta ask the answer is no. I don't recommend anyone run their amps @ 0.25ohm.
iamamp3pimp 5,000+ posts
Bass Heads Entertainment
Ill agree w that.
Hey jacob where did you get those threaded brass rods from....if you dont mind.
OP
sundownz Pro Seller
Supporting Vendor
- Thread Starter
- #83
Local specialty fastener store - I'm sure they would ship to you.
Piedmont Fastener Co
812 S Main St
Troutman, NC 28166
(704) 528-6150
I also bought all my allen bolts for my buss bars, washers, screw to secure amps, new bolts for air shocks, etc, etc right there. I'm in there alot //content.invisioncic.com/y282845/emoticons/smile.gif.1ebc41e1811405b213edfc4622c41e27.gif
iamamp3pimp 5,000+ posts
Bass Heads Entertainment
ill have buss bars when i finally get some "real batteries" in my car.
any particular reason for using Brass?
any particular reason for using Brass?
thanks jacob
what were you peaking at before the bracing, and what are you peaking at now? that had to change your tuning a little bit right
iamamp3pimp 5,000+ posts
Bass Heads Entertainment
its too early in the morning for this stuff.
!
send me a couple DB's
!
send me a couple DB's
Activity
No one is currently typing a reply...
Similar threads
Thanks man! Quitting drinking and battling DRESS syndrome has given me a new outlook on life.
- Started by ikpthegame
- Enclosure Design & Construction
i have a 15 already for the lows ita a little over kill for a crew cab but I like it and I was hoping it would sound better and louder than my old...
- Started by LoganW8000
- Enclosure Design & Construction
I have been attempting to study the true nature of why we tend to tune transmission lines and enclosures in general like we do, the nature of...
- Started by Buck
- Enclosure Design & Construction
Go get some shitty wood or cardboard or something and figure out what the max is, play around with different dimensions to see what the max cubic...
- Started by Mr FaceCaser
- Subwoofers 2
Opted to show my buckeyes some love. Used some padding and also a unique piece of laminate I hade laying around. Needless to say, I’m happy it’s...
- Started by filly4thirteen
- Subwoofers
About this thread
Latest topics
-
Jeep center console sub install issues.
- Started by vlusardi
- Replies: 1
-
-
-
-
Help With Kenwood DDX9907XR / DMX907S - Kenwood Technical Support Can't Help
- Started by fadetoblack73
- Replies: 5