So you just cut a notch in the pvc and slide in onto the port edge and screwed it down? Or is it just sitting on top of the port edge?
So you just cut a notch in the pvc and slide in onto the port edge and screwed it down? Or is it just sitting on top of the port edge?
Project 94 Exploder Bassracer
Coming Soon
So the pvc is just sitting flush ontop of the inside of the port?
edit ^^^ joo faster than I
Owner-Streetbeat Customz
Team SBC
Team IA
The Van - 6 18" Incriminator Audio Death Rows- 2 Audiopipe 3ks- tuned to 26 hz
http://www.youtube.com/watch?v=zEBmDIu_-Nk
http://www.youtube.com/watch?v=Cu0MVcvZmys&feature=related
Refs - ssackett- parker g - forceww- slam- dbman150-annarbor84 - kylediablo - theMessenjah44 - Korn4life - One Bad MOFO -CrazyKenKid -Buck- Itnelavffej- Phemps - Flex'd- jnralp00 - brandonbm- AudioXtremes- Strakele- bassaholic- Curse - Owners1- worstenemy-Villeza1-jf2oo6
It is 1/2 piece of 3" PVC sitting on the top edge of the port - correct.
- Jacob Fuller
- Owner, Sundown Audio
- Associate, Stereo Integrity
- I DO NOT USE PMs ON HERE -- Please e-mail me!
- E-MAIL is sundownz@sundownaudio.com
Simon Eichenberger is THE MAN.
- Jacob Fuller
- Owner, Sundown Audio
- Associate, Stereo Integrity
- I DO NOT USE PMs ON HERE -- Please e-mail me!
- E-MAIL is sundownz@sundownaudio.com
Simon Eichenberger is THE MAN.
Yesterday I put in another 45 degree piece:
Nothing really changed - did 155.2 dB.
Then I drilled holes to get the speaker wires out of the port... no change. BUT they were not sealed up - just holes.
---
TODAY I got threaded brass rod, washers, and nuts to make a proper connection :
I should add that before I had a smaller wire jumping from one coil to the other to parallel the coils. Now I have two sets of wires going to the common point (this is probably part of the gain I saw).
So I am up 0.3 dB from my best score and 0.4 from the score I was doing yesterday consistently.
I would say part is due to moving the wires out of the port (this has always gained me in the past) and part was due to the superior connection of running two sets of large wires off the coil.
- Jacob Fuller
- Owner, Sundown Audio
- Associate, Stereo Integrity
- I DO NOT USE PMs ON HERE -- Please e-mail me!
- E-MAIL is sundownz@sundownaudio.com
Simon Eichenberger is THE MAN.
this is very impressive jacob, very nice work, and alot of good info, looking forward to seein this jeep in action this sunday at tremorz,
1995 acura integra
AVH-P4000DVD
front:Infinity Reference 6.5" components
back: pioneer coax's
surround amp: Sax 50.4
subs:4 sundown audio sa 12s
sub amp: Saz 3500d
group 31 batts
152.5 sealed on dash
154.6 outlaw in the kick
refs:
sold to: ProjectPechkin, dB-r, coma_toast
bought from: Derrick824, t3audios_160sdbjeep, Camshoc, sundownz
I didn't know adding that wire would have such effcts.I thought the shorter the wire connection the better?Maybe that is just for series connections?
TEAM Leathal Beatz
Bought from:whiteram,Pyro_by_nature,AudioXtremes,Slab,IA2
Sold to:annarbor84,ssackett,tapout383
built for:skeptikal,Raid3r89
SHADY SELLER:memphisman00
Subs:4 Incriminator Audio Death Row 15's
amps: Memphis 4K
154.8@34hz
Ca.com
Bought from: Sctattooer, Korn4Life, wgsj_fortvalley, bk12321, Queball, bumpincrv, Splmaster, 310w6, Buck, liljojo4711
Everyone I have Bought from has been awesome.. feel safe with any of them..
Sold To: Iakona, dustinr, squeak12, Worstenemy453, BeAlLsTaR13, rmzsuzuki89, c_b_, mendon mafia, dropped_tb, SPLluminator, violence., power-fanatic07, schackel, michaellane, aviator08, kodak314, dropped_tb
Ref Link
Tamparacing
-b15spec, 727kid, pshull727, Nt_Hardcore
Want/Need ANL fuses cheap 150a 200a 250a 300a CLICK ME
So pretty much 2 runs of 12 gauge off the coils is better then i run of 10? That made a big difference if so.
Project 94 Exploder Bassracer
Coming Soon
Tried a few things with no success :
No change - 155.6
---
LOSS - Down 0.2 to 155.4
---
This has gained me in the past... but not today, did 155.5 dB this way.
---
155.5 dB again
---
So no more gains yet!
- Jacob Fuller
- Owner, Sundown Audio
- Associate, Stereo Integrity
- I DO NOT USE PMs ON HERE -- Please e-mail me!
- E-MAIL is sundownz@sundownaudio.com
Simon Eichenberger is THE MAN.
Time to double the power![]()
Team S.S.C.
Team Super Spl Civic's
CA Sundown Audio Dealer
Need a recone in the California area?? Email me.
Shoot me an email.. PM's are not the way to contact meScott "at" evocaraudio.com
impressive on little insignifant details can get the score higher. Any more ideas on what to try?
Quite a few things to go
Just for good measure I tested it again at home tonight... 155.6 is hanging in there as long as my batteries are charged up really good.
- Jacob Fuller
- Owner, Sundown Audio
- Associate, Stereo Integrity
- I DO NOT USE PMs ON HERE -- Please e-mail me!
- E-MAIL is sundownz@sundownaudio.com
Simon Eichenberger is THE MAN.
Going to need a recone anytime soon?
Ben Hemp
1994 Mazda B2300 ext. cab 5-spd RIPhttp://www.caraudio.com/forum/thunderdome/402587-forum-member-lakota-accident.html
1992 GMC Sonoma Ext Cab NEW BUILD
2008 MECA S1 KY State Champion, 151.0 dB
2008 MECA S1 WorldChampion, 151.8 dB[B]
http://sundownaudio.com/index.php/ri...in-t-hemp.html
http://profile.myspace.com/index.cfm...ndID=435314313
Refs: smd4life, Subst4nce, wccoug21, dacheatham, thegreatestpenn, jshak07
Ext Cab SPL dual 12" boxes for sale, pm me if interested. Pickup Only
| ||||||||||||||||||||||
There are currently 1 users browsing this thread. (0 members and 1 guests)