UNDERGROUND_BUMS 06 Honda Civic Sedan build Log ( vid)

[UNDERGROUND_BUM]

06 Civic EX sedan UNDERGROUND_BUMS build
the ride:


ok so heres a little vid i just made of it just banging (box not covered, just a sample) :

http://www.youtube.com/watch?v=q5HOQ_Q4Rp0



system consists of:
2 12" MAG v3's (4.0@ 35HZ)
2 kicker kx1200.1's strapped
sundown 100.2
polk momos 6.5's
pioneer avh 4000-DVD
Mechman 250a Alt
Yellow top upfront, and kinetik hc600 in back
all Knukonceptz wire
about 140 sqft Raammat/dynamat

.First off im sorry that I started the build log late and wasn’t able to get pics of the box being built or the amp rack/batt tray being built : ( However I am doing the final touches on my project and will try to take as many pictures as I can : )

The trunk will have a kind of spider web and skull theme. Hopefully I can finish just in time for Halloween ; ) lol
The spider web will start as being etched plexiglass (lit up by white leds) and sort of fade into a raised logo (extending the spider web) across the false floor. The Skulls on each side will also be lit up by white leds.

Sort of the plan but it will turn out a lot more nice (not the exact spider web) :


[


the amps will be in the spare tire wheel well stacked ontop of each other along with it the Kinetik HC600 (spare tire wheel well amp rack completed will post pics later)

Pics of stuff completed:

Mechman 250a alternator (A+++++++ on customer service and product) i cant thank matt enough : )


Yellow top/ alt:


pioneer avh 4000-DVD (ass shot for all the internet geeks : )


Polk Momo's :

[snb778]

looks pretty loud

thats crazy.. i was just bumpin that first song on the way home!

edit: nice wig, hair trick!!, LOL!

[UNDERGROUND_BUM]

(still needs to be done)
.etching spider web/ skulls into plexiglass (everything but the black part of the skulls/ spider web will be frosted)
.cut false floor accurately
.fading spider web from etched spider web (raised logo)
.cover box, false floor, and anything else with black Vinyl
.LED's
.mount amps
.make side panels (skulls) sort of a box with leds in it.
Hears a pic of the box and the logo that was cut out of vinyl (raised logo)

fairly fresh paint and contact cement with a foam roller u wont see it any ways
ok so heres a little vid i just made of it just banging (box not covered, just a sample) :

False floor ( thought id leave about 1/2 " for the amps to get some air, i could always use some weather stripping to fill the gap)


Underneath the false floor 1st amp:
v

Underneath false floor 2nd amp:


still got about 8 or 9" above the box for air movment you think i'll be ok?


lexan just came in :


me trying to figure out how it might look. lol. the black tape will be extending the logo (spiderweb) and will be raised. all white panels are lexan and will be etched and lit by white leds :


frosted vinyl stickers :

[UNDERGROUND_BUM]

alot of my lighting just came in :


web lit up white ( got to clean it when i mount it, to many finger prints lol) :

[UNDERGROUND_BUM]

reserved #2

[UNDERGROUND_BUM]

reserved #3

[UNDERGROUND_BUM]

reserved # 4

[UNDERGROUND_BUM]

some pics up............ test fitting and now i got to figure out what angle to have the side panels (skulls) sit in at. and make a kind of box for them

[azbass]

cool build and all, but the tweeter install/location is retarded.

[UNDERGROUND_BUM]

cool build and all, but the tweeter install/location is retarded.

im down for suggestions and am by no means closed minded............ where would you put them ? i really dont know to much about imaging, and would like to learn more only place i could put them on the door panel (rest of the panel was to curvy) it sounds good to me, but i am by no means a pro. this is maybe my second install. and first one with a component set. if you think you can help me sound better please do : )

heres a thread on this specific subject for my car. any of these place look good ?
http://www.8thcivic.com/forums/i-c-e...locations.html

[96MaxGLE]

I was thinking the same thing about the tweeter location, but the setup of the interior makes it difficult to find a flat surface

[ctt0002]

thats a nice looking civic there. Nice build also

[UNDERGROUND_BUM]

very difficult its like a space ship lol. what about the a -pillars? i mean if you guys think you can make it sound better i'll give it a shot cause i think i got to take the door panels of anyway sometime for somemore sound proofing...........
any advice and i'll take it into consideration, this forum has helped me out so much with anything sound related.

[UNDERGROUND_BUM]

thats a nice looking civic there. Nice build also

thanks you sir. i hope to make it even nicer when im all done with it ; )

[UNDERGROUND_BUM]

any advice on the tweeter location would be greatly appricieated...............